DETERMINATION OF THE DIAMETER OF THE CYLINDER PIECE OF CONCENTRATORY COATING WHILE MAKING A LONG LEVEL BETWEEN COTTON ROWS

DETERMINATION OF THE DIAMETER OF THE CYLINDER PIECE OF CONCENTRATORY COATING WHILE MAKING A LONG LEVEL BETWEEN COTTON ROWS

Authors

  • Nuriddin Habibovich Abdualiev Doctor of philosophy in technical sciences (PhD) Tashkent Institute of Irrigation and Agricultural Mechanization Engineers National Research University Bukhara Institute of Natural Resources Management

Keywords:

In Bukhara, Navoi, Khorezm, the regions of the third climatic zone, and in the Republic of Karakalpakstan, longitudinal and transverse floors are taken before the first irrigation of cotton, depending on the relief of the fields. Also, in soil climatic conditions of this area it is not possible to carry out the first irrigation without removing the floor[3,4].

Abstract

Irrigated lands in the cotton-growing areas of the country are divided into three zones according to natural-climatic and soil conditions, mechanical composition of the soil, technology of its cultivation, types of machines and agro-technical requirements[1,2].

References

The technological map of cotton cultivation in the third climate in Uzbekistan. Tashkent. "Uzbekistan" p. 32

Standard technological cards for the maintenance of basic agricultural crops and the cultivation of products for 2013-2017 years (part I). - Tashkent-2012, p. 8

N.M. Muradov's final report on the innovation project" introduction of a longitudinal threshold forming device for water and energy-saving for irrigation among the rows of porous", Bukhara – 2014, p. 72

Muradov N.M., Abdualiev N.Kh. Materials of the Republican scientific-theoretical conference "Improving the device of obtaining longitudinal thresholds among the rows of geese // on the topic" Increasing the efficiency of rational use of water and land resources"//, Bukhara, 22-25 November 2019, pages 5-7

Muradov N.M., Abdualiyev N. Kh. Introduction of water and energy-saving longitudinal pal-forming device for irrigation among the rows of porous// traditional 4th scientific-practical conference of professors and teachers and students on the topic “Creative Youth and innovative development” under the slogan “XXI century -ualual youth age” and the collection of the competition of scientific works of students held within the framework of unung / / Bukhara, 21-22 April 2017, pages 217-220

Singh S.P., Solanki R.C., Singh M.K.and Singh К. Development of tractor operated bund former-cum-packer for increasing resource productivity// Indian Journal of Agricultural Sciences 86 (9): 1121–6, September 2016

Muradov N.M, Abdualiev N.Kh., Murtazoev A. Scientific – practical conference of young scientists, undergraduates and students on the topic” modern problems of Agriculture and water economy " // part I / Tashkent-2017, pages 74-76

Abdualiev N. Kh. Master's thesis on the topic" justification of the parameters of the device for obtaining a longitudinal threshold between rows of geese".

Sharonov. I. A. Development of a ridge-forming roller with the justification of its optimal parameters-Diss. ... Candidate of Technical Sciences sciences'. - Ufa-2011-p. 52-55.

Yakubov Kh. I., Ramazanov A.R., Ostrobrod B.G., Bespalov N.F., Malabaev N.I., LII V.D. - Recommendations on the technology of washing difficult-to-reclaim saline soils of Uzbekistan with the use of reclamation treatment and chemical fertilizers-Tashkent-1986

Avazav R., Akhmedov A., Davletov S., Ziyomukhamedov I., Inoyatova N., Muminov S., Peacerova Z., Kadyrov R."cotton-growing spravochnigi", T.- "Labor" - 1989, p. 306 - 309

Baiboboev N. G., Abdualiev N. Kh. When performing a longitudinal fall in the aisles of cotton, determining the diameter of the cylindrical part of the sealing roller// Innovative development of modern science: topical issues of theory and practice collection of articles of the International Scientific and practical Conference Held on April 12, 2021 in Penza, pp. 53-56

Abdualiyev N.Kh. Condenser device for the device of obtaining a longitudinal pal between rows of Goose// iScience. Actual challenges of modern science // Collection of Scientific works-Pereyaslav-Khmelnitsky, 2017. - Vol.6(14), part 2 - pages 17-20.

Avazdurdiev T. Investigation and justification of the parameters of the soil roller sealer cut during washing irrigation: Abstract-dis. ... candidate of Technical Sciences. - Tashkent, 1976. 9 p.

Muradov N.M, Abdualiev N.Kh. The traditional 6th scientific-practical conference on the theme “2019 year – the year of active investment and social development” under the slogan “XXI Century-The Age of young people” and the competition of scientific works within its scope, as well as the collection of the Fair of innovative development of students// Buxoro-2019, pages 6-8.

Abdualiev N.Kh. and others. The final report on the project of young scientists on the topic of “improving the device of obtaining a longitudinal floor between rows of porcine and technological progress” YAC-ATech-2018-188. - Bukhara, 2019. p.110

Sahakyan S. S. Agricultural machines. Construction, theory and calculation. Machines for tillage, sowing and planting, fertilization, for pest control and diseases of agricultural plants. - Moscow: Selkhozizdat, 1962. - 328 p.

Tsimmerman M.Z. Working bodies pochvoobrabatыvayushchix mashin.-Moscow: Mashinostroenie, 1978.p. - 295.

Barlibaev Sh. Improving the technological process and justifying the parameters of the trowel. Candidate's dissertation p.51.

Murtazoev A. N. To improve a device that generates longitudinal thresholds between a series of cores and basic parameters. Diss. ... Candidate of Sciences, Namangan, 2020. - 100 p.

Downloads

Published

2023-03-01

How to Cite

Abdualiev, N. H. (2023). DETERMINATION OF THE DIAMETER OF THE CYLINDER PIECE OF CONCENTRATORY COATING WHILE MAKING A LONG LEVEL BETWEEN COTTON ROWS. Scientific Impulse, 1(8), 236–241. Retrieved from http://nauchniyimpuls.ru/index.php/ni/article/view/6368
Loading...